产品重量： 100g （不含电池 3节AA 5号电池）
产品尺寸：11*11*4cm
装箱资料：55*43.5*22.5cm/100cps
毛重：10.8kgs
Product Description
Product Name
LCD Tradition/NEW CO Work alone Built-in 85dB siren sound Carbon Monoxide Poisoning Sensor Warning Alarm Detector (NO Battery)
Material
Plastic
Function
CO detector
Alarm Mode
Red Led quickly flashes 4 times with unit chirping every 5 seconds, then repeat, Low-bat Indicator:Chirp every 30s as battery
lower than 3.3V with green LED flashing and Lb on LCD
CO Features:
Within 60~90 minutes at 50ppm CO concentration;
Within 10~40 minutes at 100ppm CO concentration;
Within 3 minutes at 300ppm CO concentration
LCD Displayer (optional): 4 digits LCD displayer
Audibility: 85dB ( at 1m distance ), Frequency 3 - 0.5KHZ Standby Current: <50μA
Alarm Current: <50mA Standby Mode: Green Led flashes once every 30 seconds
Alarm Mode : Red Led quickly flashes 4 times with unit chirping every 5 seconds, then repeat,
Low-bat Indicator:Chirp every 30s as battery lower than 3.3V with green LED flashing and Lb on LCD
CO Mal-function Indicator:
Chirp every 30s with green LED out and Err on LCD
Power consumption: 0.3mW
Size: 10 x 3.5cm
Powered By: 3 x AA Batteries (Not included)
A perfect item for protecting your family from the dangers of carbon monoxide
Advanced level of protection, easy to read with the digital display, even in low light conditions Displays the level of carbon monoxide the unit is sensing
Green LED:Flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before CO reading is taken and when any button is pressed.
Red LED : When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound.
The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4
short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute
until the device is reset or the CO is eliminated. Test/Reset button is designed for weekly testing if it works properly and reset
the unit during CO alarm Alerts users when batteries needs to be replaced This alarm is highly recommended to be mounted on a wall
surface Compact, lightweight & easy to operate
